Key Takeaways
- Inspect the boom lift before every shift and confirm the Certificate of Fitness (PMA) is valid before you start.
- Learn the platform controls and the ground controls on your exact machine before you lift anyone.
- Check the ground, slopes, overhead obstacles and weather before you drive or raise the boom.
- Keep a second trained person on the ground who knows how to use the emergency controls.
- Every operator needs training and familiarisation on the specific machine, and the MBAM guideline makes the employer responsible for both.
To operate a boom lift safely, inspect it every shift, learn its platform and ground controls, check the ground and overhead space, and raise the platform slowly with a trained person below. According to the Department of Statistics Malaysia, construction had 88 fatal occupational injuries in 2023, the most of any sector, with falls among the main risks.
Only trained and familiarised operators should use a boom lift. Across all sectors, Malaysia recorded 324 fatal occupational injuries in 2023, according to the same release. A boom lift puts a worker in the air at the end of a moving arm, so every job needs a clear routine.
This step-by-step walkthrough follows the order of a real shift, from the first walk-around to the last lowering of the boom.
Table of Contents
- 1. Boom Lift Pre-Use Inspection Checklist
- 2. Boom Lift Controls at the Platform and at the Ground
- 3. How to Start, Drive and Position a Boom Lift
- 4. Working at Height Safely on a Boom Lift
- 5. Boom Lift Operator Training and Certification in Malaysia
- 6. Why Work With Uptop Access for Your Boom Lift Needs in Malaysia?
Boom Lift Pre-Use Inspection Checklist
The operator inspects the machine before use each day or at the start of each shift. The Master Builders Association Malaysia guideline on safe use of mobile elevating work platforms, compiled by an MBAM committee that included CIDB, DOSH and IPAF representatives, calls for a visual inspection and a functional test before every shift. A valid Certificate of Fitness (PMA) heads its list.
Walk around the machine and check:
- a valid PMA certificate, and the safe working load (SWL) plate displayed on the machine
- hydraulic, fuel and air systems for leaks
- tyres, wheels and wheel fasteners
- loose, worn or missing parts on cables, wires and guards
- the platform floor, guardrails, gate and anchor points
- pins, outriggers or stabilisers, and the extending boom structure
- fluid levels, brakes and work lights, where fitted
- decals, warnings and the operating manual stored on the machine
Then run a functional test of the operating and emergency controls and the safety features, as the manual describes. If anything fails, tag the machine out and call your supplier. Do not lift anyone until it is fixed.
Ask your supplier for the service report and the PMA validity details when the machine arrives. The guideline also expects written inspection records to be kept, so a machine with no paperwork is a warning sign before you even open the gate.
Boom Lift Controls at the Platform and at the Ground
Every boom lift has two control stations, and you need to know both before you operate the machine.
Platform Controls
The platform controls let the operator drive, steer and move the boom while standing in the basket. They include the operating controls for each function and an emergency stop, and the layout differs between Genie and Mantall machines and between models. Read the decals and the manual, and ask a competent person to explain anything unclear, before your first lift.
Ground Controls
The ground controls sit on the base of the machine. They include provisions for overriding the platform controls, so a person on the ground can lower the platform if the operator cannot. The MBAM guideline restricts the emergency controls to emergency lowering and function tests during the pre-use check, so never use them as a shortcut for repositioning the boom.
Before you operate any control, confirm you know its position, its function and how the machine responds. The same guideline makes this familiarisation the employer’s responsibility.
How to Start, Drive and Position a Boom Lift
Once the inspection is done and the controls are familiar, follow this order.
- Start up as the manual describes. Follow the manufacturer’s start-up sequence for your model. On many boom lifts, you select ground control on the key switch, start the machine and test the functions from the ground before you board.
- Move to the platform. Climb in, close the gate or bar, anchor the hooks of your safety harness on the hook points as your site rules and the manufacturer’s instructions require, and switch to platform control.
- Survey the route. Check the area before and during use, as the table below shows.
- Drive with care. Travel slowly with the boom stowed or low, watch the direction arrows on the chassis and keep other workers and vehicles clear of the path.
- Position on firm ground. The surface must carry the ground-bearing pressure of the machine in every working position. Deploy outriggers or stabilisers where the manufacturer requires them.
- Raise the platform slowly. Lift and swing in small movements, and stop to check clearance above and around you before each new move.
The guideline lists the hazards an operator should check in the work area before and during use. Use it as a route survey list.
| Hazard | What to look for |
|---|---|
| Ground | Drop-offs, holes, slopes, soft or weak surfaces |
| Floor level | Bumps, obstructions, debris and electric cables |
| Overhead | Beams, pipework, structures and electrical conductors |
| Surroundings | Other workers, vehicles and busy walkways |
| Weather | Wind and storms that affect the machine |
Wind and weather change the picture quickly. Check the forecast before you start, and lower the platform and stop work when conditions go beyond what the manufacturer allows. Keep a safe distance from overhead power lines at full extension, as the guideline stresses.
Working at Height Safely on a Boom Lift
Safe work at height depends on habits that hold for the whole shift.
- Keep both feet on the platform floor. The guideline prohibits climbing on guardrails and using planks or ladders on the platform.
- Stay within the manufacturer’s rated load for your configuration, shown on the safe working load plate, and the occupancy limit in the manual.
- Secure or anchor tools and materials so they won’t drop out of the boom lift platform.
- Travel with the boom and platform at the lowest safe position for the conditions.
- Keep a second trained person on the ground who knows how to use the emergency controls.
- Wear the protective equipment your site risk assessment calls for, and follow the manufacturer’s instructions for harness anchor points.
The Occupational Safety and Health Department said in a statement reported by The Star that 1,299 cases of falls were recorded at construction sites across the country in 2024. A boom lift gives you a guarded platform at height, but that protection holds only when the machine is used as the manufacturer and the guideline describe.
At the end of the shift, lower the platform, park the machine in the designated parking area with the engine or motor switched off and the brakes applied, and remove the key. The guideline asks for keys to go only to authorised operators, and for any fault to be tagged and reported to a designated person before the machine is used again.
Plan for an emergency before the shift starts. If the operator is stranded, the guideline says rescue should be done by a trained person using the ground controls or the secondary lowering system where possible. Rescue from another machine needs a site review and a written plan first.
Boom Lift Operator Training and Certification in Malaysia
The MBAM guideline puts the duty on the employer to make sure every operator is trained and instructed by a competent person before operating a MEWP, and that the operator is familiarised with the specific machine and its controls. The guideline also asks for these activities to be documented, so keep the training and familiarisation records ready on site.
Uptop Access supports operators at two levels:
- Free on-site familiarisation training with every boom lift we rent or sell. The session covers the controls, safety features and operating characteristics of the machine delivered to your site.
- Comprehensive MEWP Operator Training, which takes 3 to 4 hours per machine type and covers more in-depth knowledge alongside its routine maintenance procedures. The certificate has no expiry date.
Familiarisation and training do different jobs. Familiarisation shows an operator how the exact machine on site behaves and where its controls are, and it should happen before work starts. Training builds a wider knowledge of safe operation and maintenance. We include free familiarisation with every boom lift rental and purchase, and your team can book Comprehensive MEWP Operator Training separately.
Each machine type needs its own training, so an operator who moves from a scissor lift to an articulating boom lift needs both. Settle on the right boom lift for the job early, then book the training before the machine arrives so your crew can start on day one.
Why Work With Uptop Access for Your Boom Lift Needs in Malaysia?
Uptop Access has supplied work platforms in Malaysia since 2000, from our branches in Shah Alam and Bukit Mertajam. Every boom lift we rent or sell comes with support that keeps your crew working safely from the first shift:
- JKKP PMA minimum validity checked before every rental
- Free on-site familiarisation training for your operators
- Comprehensive MEWP Operator Training for each machine type
- Service reports and same-day breakdown attendance
- Genie and Mantall machines, with spare parts and after-sales servicing on units we sell
If you would like to arrange a boom lift with familiarisation training, or book your team for our comprehensive MEWP operator training, feel free to call Uptop Access, email sales@uptop.com.my or message us on WhatsApp. Our team will guide you through the options.
References
- Department of Statistics Malaysia. (2024). National Occupational Injury and Disease Statistics 2023. Available at: https://www.dosm.gov.my/portal-main/release-content/big-data-analytics-national-occupational-injury-and-disease-statistics-
- Master Builders Association Malaysia. (2017). Guidelines for Safe Use of Mobile Elevating Work Platform (MEWP). Available at: https://www.ipaf.org/sites/default/files/2019-10/Malaysia%20Safe%20Use%20of%20MEWP%20Guidelines%202018%20%28Final%20Version%2025.04.2018%29.pdf
- Trisha, N. (2025). DOSH carrying out worksite safety compliance checks nationwide. The Star. Available at: https://www.thestar.com.my/news/nation/2025/12/11/dosh-carrying-out-worksite-safety-compliance-checks-nationwide

